Netcorp hardware
Tracking hardware built for Australian conditions
From a single ute to a national heavy fleet, Netcorp designs, builds and supports the devices that feed Netcorp360, and fits them with our own technicians in every state.
25+
Years in Australian telematics
20,000+
Assets on the platform
ISO 9001 & ISO 27001
Certified
IP67
Rated as standard
Solutions by asset
Find the right solution for every asset
Choose what you run and explore the solutions built for it.
Heavy Vehicle
Prime movers, rigids, agitators, waste bodies, tankers and tippers. HVM01 reads the vehicle and everything bolted to it.
Choose a Heavy Vehicle type
HVM01 on J1939 for engine, fuel and fault data, with NHVR-approved EWD, in-cab AI video and multi-trailer cameras.
Solutions for Prime Mover
HVM01
HVM01
The core heavy vehicle unit. Engine, fuel, AdBlue, fault codes and engine hours from J1939, with digital and analogue inputs for standard body equipment.
CANbus / J1939
Engine, fuel, AdBlue, fault codes and engine hours.
Auxiliary I/O
Digital, analogue and CAN inputs.
Heavy vehicle compliance
Pairs with NHVR-approved EWD, pre-starts and fault management.
Built for the yard
Proven in concrete trucks and quarry loaders.
- Installation
- Hardwired, Netcorp technician
- Power
- Vehicle
- Reporting
- 10–60 s, to 1 s
- Engine data
- CANbus / J1939
- Aux inputs
- Digital, analogue, CAN
- Connectivity
- Telstra 4G, Netcorp-managed SIM
- Rating
- IP67
Compare Prime Mover
| Specification | HVM01 | AI dash camera, 1 TB | MDVR 8-channel |
|---|---|---|---|
| Installation | Hardwired, Netcorp technician | Netcorp technician | Netcorp technician, 8–14 h |
| Power | Vehicle | Vehicle | Vehicle |
| Reporting | 10–60 s, to 1 s | Not listed | Not listed |
| Engine data | CANbus / J1939 | Not listed | Not listed |
| Aux inputs | Digital, analogue, CAN | Not listed | Not listed |
| Channels | Not listed | Road- and driver-facing | 8 |
| Storage | Not listed | 1 TB | Not listed |
| Connectivity | Telstra 4G, Netcorp-managed SIM | Telstra 4G, Netcorp-managed SIM | Telstra 4G |
| Rating | IP67 | Not listed | Not listed |
Built in-house
Designed, built and supported by Netcorp
Netcorp designs its hardware and firmware in-house, with our own SMT electronics manufacturing, and runs the platform on infrastructure we own in Sydney. One company is accountable for the device, the data and the support desk.
- In-house hardware, firmware and SMT manufacturing
- Hosted on Netcorp-owned infrastructure at Equinix SY6, Sydney, with Australian data kept onshore
- Telstra SIMs supplied and managed through Netcorp's own SIM management platform, on business-grade M2M plans
- IP67 and vibration tested across the full Australian temperature range
Installation & service
Fitted by our technicians, in every state
Netcorp-employed technicians install on site at your depots, plants and job sites, around your operation, with regional service partners after installation.
- Basic GPS install in about an hour, with same-day activation
- MDVR installs typically take 8–14 hours, scheduled around your fleet
- Self-install kits with remote commissioning support for remote assets
- Advance replacement dispatched within 24 hours of diagnosis
- Modular hardware customers can swap themselves, with no technician visit needed
One platform for every device
Every device, one view in Netcorp360
Vehicles, plant, trailers, cameras and sensors all report into the same platform, on the same map and timeline.
- Live map and trip history
- 50+ report templates, scheduled to the people who need them
- iOS and Android apps
- Unlimited user licences
- REST API and webhooks
Not sure which device fits?
Tell us what you need to track and we'll specify the right hardware for each asset, for free, with no obligation.